> Physical Port

> 24 10/100/1000BASE-T Gigabit RJ45 copper ports with 24-port IEEE 802.3af/at PoE+ injector

> 4 10GBASE-SR/LR SFP+ slots, compatible with 1000BASE-SX/LX/BX SFP

> RJ45 console interface for switch basic management and setup

> Power over Ethernet

> Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE

> Backward compatible with IEEE 802.3af Power over Ethernet

> Up to 24 ports of IEEE 802.3af/IEEE 802.3at devices powered

> Supports PoE power up to 36 watts for each PoE port

> Auto detects powered device (PD)

> Circuit protection prevents power interference between ports

> Remote power feeding up to 100 meters

> PoE management

> Total PoE power budget control

> Per port PoE function enable/disable

> PoE admin-mode control

> PoE port power feeding priority

> Per PoE port power limitation

> PD classification detection

> Temperature threshold control

> PD alive check

> PoE schedule

> Layer 2 Features

> Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)

> High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

> Storm Control support

> Broadcast/Multicast/Unknown unicast

> Supports VLAN

> IEEE 802.1Q tagged VLAN

> Up to 255 VLANs groups, out of 4094 VLAN IDs

> Supports provider bridging (VLAN Q-in-Q, IEEE 802.1ad)

> Private VLAN Edge (PVE)

> Protocol-based VLAN

> MAC-based VLAN

> Voice VLAN

> Supports Spanning Tree Protocol

> IEEE 802.1D Spanning Tree Protocol

> IEEE 802.1w Rapid Spanning Tree Protocol

> IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN

> BPDU Guard

> Supports Link Aggregation

> 802.3ad Link Aggregation Control Protocol (LACP)

> Cisco ether-channel (static trunk)

> Maximum 14 trunk groups, up to 4 ports per trunk group

> Up to 80Gbps bandwidth (full duplex mode)

> Provides port mirror (many-to-1)

> Port mirroring to monitor the incoming or outgoing traffic on a particular port

> Loop protection to avoid broadcast loops

> Layer 3 Features

> IP interfaces (Max. 8 VLAN interfaces)

> Routing table (Max. 32 routing entries)

> Routing Protocols (IPv4/IPv6 software static routing)

> Quality of Service

> Ingress Shaper and Egress Rate Limit per port bandwidth control

> 8 priority queues on all switch ports

> Traffic classification

> IEEE 802.1p CoS- TOS/DSCP/IP precedence of IPv4/IPv6 packets

> IP TCP/UDP port number

> Typical network application

> Strict priority and Weighted Round Robin (WRR) CoS policies

> Supports QoS and In/Out bandwidth control on each port

> Traffic-policing on the switch port

> DSCP remarking

> Multicast

> Supports IGMP snooping v1, v2 and v3

> Supports MLD snooping v1 and v2

> Querier mode support

> IGMP snooping port filtering

> MLD snooping port filtering

> Multicast VLAN Registration (MVR) support